Over 60 Years of
Experience in
Well Drilling and Pump Service
Our locally owned and operated company specializes in well drilling, pump and pressure system installation, repair and replacement for residential, commercial industrial and municipal properties.
Experienced Choice
Camp Well Drilling And Pump Service is a provider of well drilling and water well pump service in Missoula, Montana.
Well Drilling
Adding a water well to your property is a wise and resourceful investment that you’ll want to have handled properly from start to finish.
"These guys went above and beyond. My water tank stopped working during the flood and Camp Well sent out a tech who had to park a good half mile away from my home due to the road closures and donned chest waders and crossed through 2 yards, a flooded field and the river to get to my house. The first 3 places I called said "No" but They didn't hesitate. They will be my first call from now on. THANK YOU!!"
-- Ms. Genevieve K., Missoula, MT
Your pump is running all the time this could be because your pump is worn and can’t build up enough pressure to shut off. Or, you have a leak somewhere and that’s preventing the system building up to pressure.
Check your pressure tank – you could have low pressure if your tank is bad or improperly charged. You might have a leak somewhere and that’s preventing the system building up to pressure. This could be water use in your home as well. Or, your pump is worn and is not moving the amount of water it used to.
To check to see if your pressure tank needs charged or replaced first turn off the power to the pump. You can do this by flipping a breaker or there might be a disconnect box near your pressure tank. Once the power is off, run a few faucets to drain your system and then you can check the pressure. The pressure in your tank should be two pounds lower than your cut in pressure on your pressure switch. For example - if your system turns on at 40 pounds and builds up to 60 pounds before shutting off, then your tank should be around 35 - 38lbs. check to see if your tank is water logged by giving it a push, an empty tank should be light enough to shake. If you hear water slosh around or it’s too heavy to move at all you likely need a new tank.
What Our Clients Say...
"They are definitely one of the best well drilling companies in the world!"
Claude Robinson
"They were very helpful and fast to respond!"
Marcia Gyles
"Brian and crew did a excellent job getting us into their schedule and getting us a good well."