fbpx

Blogs

Consumer Information Resource

Displaying items by tag: Need

Saturday, 24 November 2018 13:55

How Much Water Do I Need from My Water Well?

If you are considering sourcing your water from a drilled well, there a number of factors that you should think about before hiring well drilling companies in Missoula, MT. The scope of your water needs, the type of usage that you are hoping to get out of your well and the location of your property will all determine the depth, type and size of your drilled well.

Working with a qualified contractor is the best way to ensure that your water needs are met effectively. You should only hire well-known contractors who can provide you with top-notch services, and who will consult with you on the type and size of well that you need to have drilled.

Water well drilling represents a substantial investment, and should be considered seriously before you hire a contractor. Working with the right team is exceedingly important. Here are just some of the things that you should consider when you are looking to begin the process of reaching out to water well drilling companies in Missoula, MT:

  • Determine your needs: The first step of determining where to drill your well is determining precisely what your daily water needs might be. This will help you establish the type of well that you need to drill, and its depth. The average household uses 50 to 75 gallons of water per person each day. Lawn care and livestock require a substantially higher amount of water.
  • Figure out what type of well you want: Will your well be primarily for human consumption, or will it be used to irrigate crops or water livestock? Determining this is important, as it will affect the way that your well is dug as well as impact the final cost of drilling.
  • Set your desired depth: Because drilling is expensive, you will want to drill precisely the right depth for your water usage. Some land may have a lower or higher water table, so working with an experienced professional is extremely important. Consult extensively with qualified water well drilling companies in Missoula, MT.
  • Prepare for the costs: If you are drilling a well to provide your household with water and care for your lawn, you can expect to pay a substantial amount. Wells are an investment, however, and are essential for many rural landowners. Ensure that you are working with a qualified drilling expert to spare yourself any unnecessary costs.

Since 1953, Camp Well Drilling and Pump Service has been one of the premier water well drilling companies in Missoula, MT. You can count on our knowledgeable team and associates to provide you with a high quality well that will be a dependable and safe water source for years to come. Our friendly contractors will gladly walk you through the process of determining what type and size of well you should dig on your property, and we will assist you with every aspect of the drilling process. Reach out to us today to learn more about our extensive service offerings!

Anyone who has a well currently or is planning on drilling one in the future knows how important it is to have a consistent and reliable source of water from their well. If one aspect of the well isn’t working as it should be, it can alter the quality of your water and potentially pose a health and safety hazard to you and your family. It is important to have your well installed and maintained with the help of a professional contractor who specializes in water well drilling in Missoula, MT. They will be able to help ensure that your well is functioning the way it should be to avoid any problems with the quality of your water.

Let’s take a closer look at the basics of water well drilling:

  • The first step in drilling a well is establishing an area for your well to be placed. This placement is important, since it will determine the quality of water that you will have access to, as well as the degree of difficulty associated with drilling your well.
  • Once you have determined where your well will go, the drilling process begins and a hole is bored into the ground with the use of drilling equipment.
  • After the hole has been established, a casing will be placed to prevent contamination. Inside this casing, a pumping mechanism and a pipe are placed that bring ground water up to the surface.
  • Your specific geographical area will determine how the intake portion of your well is designed and established. Depending on the landscape and topography of your area, the intake could be screened and packed with gravel, or it could simply be an open hole in the bedrock.
  • During water well drilling in Missoula, MT, a well cap and an air vent will be installed. The purpose of the air vent is to normalize the pressure within the well and release gases from the ground.
  • At some point during the installation of your water well, your water will be pumped to check for quantity as well as quality.

After your well has been established, consistent maintenance, testing and upkeep should be a high priority. As a well owner, you can keep your well in good condition by keeping any potentially hazardous chemicals or materials away in order to prevent dangerous water contamination. It’s also important to keep the area surrounding your well free from any leaves, lawn clippings and other debris that can lead to drainage problems. Checking on the condition of your well cap should also be a part of your regular well maintenance. Your cap should be in good condition so that it is able to perform its necessary function for your well.

At Camp Well Drilling and Pump Service, we are experts in all things water wells, so you don’t have to be! Our team of phenomenal water well contractors and trained pump technicians are able to take on projects of all scales and sizes. No matter what your specific needs may be, we would be more than happy to work with you. Just give us a call today to get an estimate for well drilling in Missoula, MT!

If you live within city limits, you likely have no need for a water well. The city provides water for you, and you pay for it through utility bills. However, if you live outside of city limits and you want running water, it’s necessary to have a water well. Before you pay for water well installation in Missoula, MT here’s a fairly comprehensive list of everything you need to know about water wells.

What is a water well?

First and foremost, if you’re considering installing a water well, you should probably know what it is. A water well is a structure drilled into the ground to get to groundwater. Water is drawn to the surface by a water pump. Depending on the type of water pump, the pump either draws the water up, where it’s stored in a tank, or it draws water up to the surface directly into your pipes and into your home or business.

When do I need a water well?

In the olden days, everyone needed a water well, no matter where they lived. But thanks to modern technology that delivers fresh water to every building in a city, only folks who live outside of city limits need to pay for water well installation in Missoula, MT.

Where should a water well be installed?

Before installing a water, well it’s probably a good idea to know where you can do it to get the most water as possible. It’s fairly uncommon to drill and hit a totally dry spot, but it can happen. More often, a well will be drilled and the water yield will be minimal for one reason or another. That’s not good. Luckily, your contractor, with the help of the local government, will figure out the ideal spot to drill to get the most bang for your buck. Your contractor will also obtain all of the necessary permits to start drilling.

How is a water well installed?

Centuries ago, when humans were digging the first wells to get to fresh water in arid locations, they had to dig wells by hand with rudimentary shovels. Fortunately, we’ve come a long way since then, and now have methods for installing a well without hours upon hours of digging through dirt.

There are two ways to install a well in 2016. We can drive a well into the ground using heavy machinery to force it in. Or, we can drill it in using heavy machinery that is usually attached to the back of the truck. The length of the well depends on how deep down the ground water is located. After all, you don’t want a well that’s too shallow to make it to the water. Our experts will determine how deep the well needs to be. The diameter of the well, meanwhile, depends on how much water you’ll need and at what rate you’ll need it.

Call Camp Well Drilling and Pump Service to find out more about water well installation in Missoula, MT, and to schedule our services!

Saturday, 24 November 2018 12:38

Signs You Need Well Pump Replacement in Missoula, MT

Have you been having problems with your water well pump? Depending on what you’ve been experiencing, the problem may have passed the point at which making repairs is reasonable or affordable. Instead, it might be time for you to start looking into well pump replacement in Missoula, MT.

You can typically pinpoint whether your pump is having problems when you notice signs such as decreased water pressure, dirty water, strange noises, air leaks or high electric bills. Additionally, any type of factor that puts undue strain on the pump could also cause its failure. Here are just a few situations in which the pump could fail, causing you to need a new one:

  • Expansion tank loses its pressure: An expansion tank is a closed container that the pump fills with water. As water goes into the tank, the air becomes compressed, typically with the assistance of a vinyl air-filled bladder. Compression continues until pressure gets high enough that it trips the pressure switch. Whenever someone turns on a water faucet, the tank’s air pressure squeezes the bladder, which leads to water coming out. Then, if enough water is used to lower the pressure, the switch will turn on the pump again, repeating the cycle. However, if something happens to the tank that causes it to lose its pressure, the pump is forced to work overtime to fill up the tank, which makes a pump failure more likely.
  • Lack of maintenance: If you have neglected general well pump repairs or maintenance over the years, you’re more likely to experience a pump failure and need to purchase a new one earlier than you otherwise would have. Common repairs include replacing the tank and the pressure switch, as well as routine maintenance sessions. Making these repairs is important, as purchasing a whole new pump is significantly more expensive than engaging in regular maintenance.
  • Power outages: Unless you have a backup power supply on hand to power the well pump in case of emergencies (such as a backup generator or an extra battery), the pump is likely to fail if it loses electricity. Therefore, it’s important to be prepared for potential power outages, as they could become quite costly if you do not have backup.

A good submersible well pump should last you approximately 25 years. If you want to avoid having to make an early replacement, keep up with your routine maintenance and repairs and make sure you are doing everything in your power to keep the pump functioning at its peak capability.

When you do need to seek out well pump replacement in Missoula, MT, make sure you work with a team of professionals that has a lot of experience in the area in helping people maintain and install well pumps. At Camp Well Drilling and Pump Service, we have more than 60 years of experience in helping customers with water well drilling, well pump service, water well installation and much more. Contact us today with any questions you have.

It’s easy to take the running water in our homes for granted. We rely on water numerous times throughout the day—from our morning showers to the dishwasher that cleans up after our meals—and we don’t always remember that it’s coming into our homes from the same place: the well that serves our property. It’s only when we start to have problems with our well that we’re reminded of exactly how important it is in our daily lives!

Generally, well problems pertain to the well pump more often than not. Well pumps are critical in getting fresh water into our homes and if anything goes wrong with the pump, the results are bound to be reflected in the problems we experience with our water.

Take a look at five common signs that you need immediate well pump repair in Missoula, MT and what these issues might indicate:

  1. Dirty water: Dirty water is a major problem for a number of reasons, namely because it’s unsanitary. Tracing dirty water back to a well pump is easy enough and it generally occurs when the seals protecting the pump have been compromised in some way.
  2. Gurgling or plunging noises: If you hit the tap and you’re greeted with a gurgling noise or odd sucking sound before water comes out of the tap, it’s a sign that your well pump is under duress. These strange noises indicate that the pump is nearing mechanical failure or that air has gotten into the system causing a loss of pressure, which can invite any number of other issues to arise.
  3. High energy bill: Has your energy bill spiked recently? If so, the culprit might be the last thing you suspect: your well pump. If your pump has been compromised in some way and is struggling to hold pressure, it might run continuously, which can dramatically increase your energy bill each month.
  4. Loss of pressure: If your water pressure takes a dip it might be time to check that your well pump hasn’t been compromised. Pumps are a closed-loop system and when that system becomes damaged it’s going to compromise pressure, which will eventually show when you turn on the sink or step into the shower.
  5. Total pump failure: This is a no brainer! If you turn on your faucet and nothing comes out, you’re going to want to get on the horn about well pump repairs in Missoula, MT right away. Any number of things can cause a pump to fail entirely—including a power outage—so it behooves you to call a professional right away to pinpoint and isolate the problem.

Issues with your well pump are nothing to ignore and even worse to let fester. A couple hundred dollars in repairs might not be the cheapest home expense you have to undertake, but they’re going to be far more affordable than a full pump replacement, which can range in the thousands of dollars when all is said and done