Consumer Information Resource

Displaying items by tag: MT

Here’s What to Do When Your Well Pump Is Not Pumping

Is it time to replace your well pump? If this equipment is not functioning properly, you might wonder if you need well pump service in Missoula, MT, or if you just need a new pump. The good news is that well pumps tend to last for two decades or more. If you are experiencing issues with your well pump, it’s often due to a minor issue that can be repaired without replacing the entire pump.

How can you determine the issue? If your well pump is not pumping, use the following troubleshooting guide. This will help you fix the problem or decide if you need professional well pump service in Missoula, MT to make in-depth repairs or replace the unit.

No Water

Has the water flow from your pump ceased entirely? This could be due to a simple power issue. First, locate the circuit breaker that controls the well pump and reset it. If the breaker was tripped, turning it off and on again should correct your problem.

The lack of water flow could also be caused by sediment issues. Rocks and other debris can clog your system and block the water flow. Check your system for built-up sediment. If you discover this is an issue, clear away the sediment as soon as possible. Leaving this buildup in your system can wear down the pump and cause further issues.

No Pressure

Without the proper pressure, your tank won’t operate properly. If your pump is not pumping, you may have a broken bladder or worn-out diaphragm. Check these parts to determine if they need to be replaced. If you need new parts, contact your local well pump service in Missoula, MT to obtain the necessary replacements and installation.

No Clue

If you perform these troubleshooting tips and are unable to fix the problem, it’s time to call for professional well pump service in Missoula, MT. It’s important to avoid causing further damage by attempting amateur repairs. If your pump is producing dirty water, spitting air or is running constantly, these can be signs of serious issues. Reach out to a professional for assistance.

Keep in mind, if your troubleshooting efforts work initially, but the problem recurs, there is probably something else going on with your pump. Your local well pump service in Missoula, MT can perform a thorough inspection and determine the root cause of the problem. Once this is discovered, these experts can make repairs that will keep your system running optimally. Regular inspections by these professionals can further improve the overall functioning of your system.

Get More Tips

Would you like to learn more about your well pump system and how to properly maintain it? Contact the industry leaders at Camp Well Drilling and Pump Service. We’ve been the area’s go-to source for professional well pump services since 1953. We specialize in the drilling of water wells, as well as new installations, repairs and replacements for water pumps for residential, commercial, industrial and municipal clients alike. Camp Well Drilling & Pump Service also provides the sales, installation and servicing of constant pressure systems or variable speed drives, water reservoirs or cistern and booster pump systems, water pumps, pressure tanks and hardware. Reach out to us today for better well pump operation tomorrow.

Saturday, 24 November 2018 14:52

Seven Common Well Pump Pressure Switch Problems

Issues with pressure switches are a common cause of water well supply problems. Are you struggling with these challenges? If your well isn’t functioning properly, use the following troubleshooting guide from your experts in water well drilling in Missoula, MT.

Many times, property owners can complete a quick fix that will restore their water supply. However, if you aren’t able to solve the problem, don’t hesitate to contact your local professionals in water well drilling in Missoula, MT.

Switch Won’t Turn On

This is one of the most common causes of pump issues. If your switch won’t turn on, your tank pressure might be above the switch’s cut-in pressure. For a quick fix, run water in another part of your property. This will reduce pressure and may cause the switch to operate properly. A gentle tap on the tank or gauge can also help.

Switch Won’t Turn Off

The reverse problem is also a frequent issue. If your switch will not turn off, the first thing you should do is cut the power. This will prevent switch burn-out. Once the power is off, check your water supply. Check for leaks that could be causing pressure issues.

Switch Clicks On and Off

If your pump is cycling on and off, this could be caused by a blown bladder. The endless cycling can cause damage to the contacts on the switch. First, check the bladder, which can be found in the water tank. If it is damaged, replace it. Then, inspect the switch contacts to ensure no damage has occurred from the frequent cycling.

Clogged Pressure Sensor

Sediment in your system can clog the pressure sensors. Your switch is at higher risk of this issue if you live in an area with high mineral content in the water supply. If the sensor is clogged, clean the tube that stretches between the switch and the water supply. Then, clean the switch itself. In some cases of severe clogging, you may need to simply replace the switch.

Damaged Diaphragm

Is your system able to sense the correct water pressure? If the diaphragm switch is damaged, it can not perform this essential function. Over time, diaphragms wear out. If it is no longer able to sense the pressure, you will need to replace the switch.

Failed Connection

Your pump pressure switch problem might actually be due to a connection elsewhere in the system. Look for leaks in the piping. Any loose connections or leaks can cause the switch to malfunction. To obtain a thorough, professional inspection, contact your local experts in water well drilling in Missoula, MT.

Bad Contacts

The electrical contacts of your switch can wear out with use. Corrosion can also be an issue. If frequent cycling or rust has taken its toll, the contacts may be bad, and you’ll need to replace the switch.

Call for Backup

Is your system experiencing an issue you don’t see on this list? If you need more answers or additional assistance, don’t hesitate to contact your local experts in water well drilling in Missoula, MT. Locally owned and operated, Camp Well Drilling and Pump Service prides itself in offering prompt, high-quality services to Missoula and the surrounding areas. Reach out to us today!

You’re probably aware of the health benefits of regular exercise. If you brush your teeth each day, you probably value the health benefits of oral hygiene. But did you know there are also health benefits that come with regular water system maintenance in Missoula, MT?

That’s right—keeping this system well maintained offers personal health benefits for you and your family. In contrast, failure to properly maintain this system can prove detrimental to your health. Here’s the scoop.

Pure Water is Good for the Body

Our bodies need water to survive. Our bodies need quality water to thrive. It stands to reason that when you give your body the pure water it needs, you’ll feel better. Your health benefits from a healthy intake of water.

When you take in more water, your body is better able to absorb nutrients. This intake also helps with weight loss and detoxification. Keeping the body well hydrated with purified water keeps systems operating optimally and boosts your overall health.

How can you achieve this healthy intake of water? When you perform regular water system maintenance in Missoula, MT, you keep your system in top performance so it delivers the pure water your body craves.

Water Systems Are Environmentally Friendly

What happens when people don’t have access to a well-maintained water system? To avoid drinking poor-quality water, they often purchase bottled water. This results in piles of plastic at landfills all over the world. Use regular water system maintenance in Missoula, MT to reduce waste and keep the planet cleaner. This will benefit not only your health, but that of generations to come.

Water Filtration Removes Toxic Elements

If you properly maintain your water system, you will remove a host of potentially dangerous contaminants from your water. Regular maintenance allows the system to properly filter out toxins that are hazardous to your health.

Arsenic is one of the poisons traditionally found in tap water. This is a potent carcinogen that can increase the risk of cancer. A water filtration system in Missoula, MT can also filter out disinfection byproducts. These are used by municipalities to disinfect drinking water. While they make the water healthier in some ways, they can also add harmful chemicals like chlorine to the water. A properly maintained filtration system will safely remove these byproducts.

Aluminum is another element often found in unfiltered municipal water. Consuming too much aluminum may cause skin problems, hyperactivity, Alzheimer’s disease and liver disease.

The fluoride found in drinking water can also pose health risks. It may lead to cellular damage and a weakened immune system.

The pipes used for many water systems are older, which means they may be made of lead. As the material leaks into the water, it can make the water dangerous. Fortunately, a water system can filter out the lead and protect you from these potential harms.

Protect Your Health

Why not start reaping the health benefits of purified water? For proper water system maintenance in Missoula, MT, partner with the pros at Camp Well Drilling and Pump Service. Since 1953, we’ve been a premier source for prompt, high-quality services in Missoula and the surrounding areas. Contact us today with any questions or to schedule your next maintenance service.

When fresh water is so easy to access, we often take it for granted. The system that brings filtered water to your tap rarely gets any attention until there is a problem. Unfortunately, this lack of maintenance is what causes those problems. Your water filtration system in Missoula, MT needs regular maintenance to keep it functioning optimally.

Why? The system works hard to separate the unwanted debris from your water before it reaches your sink, shower or washer. These removed particles can build up in the system over time and obstruct the water flow. Eventually, a lack of maintenance causes the system to become ineffective or break down entirely. So, how can you properly maintain your water filtration system in Missoula, MT? Use the following tips.

Replace Your Habits

You probably brush your teeth every morning. You take your car to the mechanic for regular tune-ups. These things are easy to forget if they aren’t part of your routine. What are your current habits regarding your water filtration system? To keep your water filtration system in Missoula, MT well maintained, replace the habit of forgetting about it with a habit of good maintenance. Establish a maintenance routine for this system.

Each week, clean your system. Use warm water to wash away any debris on the filters. Clean individual components to keep water flowing freely. Make this part of your normal house cleaning or other chores so your system doesn’t suffer from particle buildup.

Replace the Filter

You’ve probably heard similar warnings about your furnace or car. It’s essential to replace filters when needed to keep your water filtration system in Missoula, MT in top form. It’s not a difficult task—it’s simply difficult to remember when you aren’t thinking about it very much. Many systems even have an indicator to tell you when it’s time to replace the filter cartridge. When it’s time to do so, don’t delay. Waiting will only make your system ineffective. Your water quality will suffer, and so will the system’s parts.

Replace the System

How old is your water filtration system in Missoula, MT? Modern technology offers great advancements in filtration systems. If your system is older, consider the advantages of replacing it with a newer system. A modern system might be easier to maintain and offer better results. The savings in maintenance and energy that a new unit offers may far outweigh the initial investment in the system. Consult with your local filtration system expert to determine what might be the best solution for you and your property.

Learn More

If you’d like to find out more about proper maintenance for water filtration systems in Missoula, MT, contact the experienced team at Camp Well Drilling and Pump Service. We’ve been a go-to source for water services in Missoula since 1953. Locally owned and operated, we pride ourselves in delivering prompt, quality services to our community. Contact our knowledgeable staff today with any questions about your water filtration system. We look forward to partnering with you to keep your system in top shape.

As the temperatures begin to drop and the leaves start to fall, homeowners check off their seasonal maintenance list to prepare for the colder months. You may have scheduled your fall HVAC maintenance. Perhaps you inspected your roof. Maybe you already rearranged your wardrobe to access your winter sweaters.

But, what about your well pump service in Missoula, MT? Did you know there are steps you should take to prep this system for winter, too? Use the following expert guide to properly prepare your water pump and well for the cold season. These maintenance steps will help keep your system running smoothly through the winter and prevent additional maintenance and repairs down the road.

  • Protect it: Freezing conditions are harsh on your mechanical seals and bearings. It’s important to protect these parts from the elements during frigid winters. To do this, wrap the water piping and seal. This will provide a layer of insulation to preserve your well pump for the season. For pipe insulation, you can use thick fabrics such as blankets or a foam insulation. Use heat tape to create a tight seal at the edges. If possible, provide a heated shelter for your pump if it will remain exposed during the winter.
  • Drain it: If you shut down your well pump for the season, be sure to drain it fully. It must be completely free of water before freezing temperatures arrive. If not, the water will freeze in your system, expand, and cause damage to the pump. When you drain the system, don’t forget to include all the lines.
  • Check it: During winter, the pump’s bearings require close watch. Condensation in the system can quickly freeze, and the ice will prevent proper movement. Be sure your system has plenty of oil before cold temperatures arrive, so it keeps moving smoothly through the season. Additionally, ensure the type of oil is appropriate for the expected temperatures. Check your manufacturer’s recommendations for use of synthetic or traditional oils.
  • Prep it: Check all moving parts before winter arrives. Will you need new belts soon? The drives and pneumatics should be in great shape to avoid having to replace them during sub-zero weather.
  • Sink it: If your well pump has a fountain or pond location, you may be able to winterize by sinking the motor to the bottom of the pond. Be sure to weight it enough that is sinks below the lowest freezing level of the water.

Do you have additional questions about your well pump service in Missoula, MT? Whether you need assistance with winterizing, need repairs or have other questions, don’t hesitate to contact the experts at Camp Well Drilling & Pump Service. Since 1953, Camp Well Drilling & Pump Service has established itself as Montana’s premier well drilling and pump company.

Locally-owned and -operated, we pride ourselves in offering prompt, high-quality services to Missoula and the surrounding areas. Contact our professional team today at 406-549-3411.

Until there is a problem, most homeowners don’t think much about their water source or water quality. Is this true for you? Do you know what’s in your water? Many water sources contain elements that can cause property damage or even health concerns. The perfect solution is a water softener system in Missoula, MT.

Could your home benefit from one of these systems? Consider the following advantages a water softener system offers. If you’re still not sure if this solution is right for you, contact your local provider for a professional consultation.

  • Preserved pipes: All the chemicals present in hard water can cause severe wear and tear on plumbing over time. A water softener system creates water than is easier on your pipes. This can save money over the long run, as it extends the lifespan of piping and reduces the number of plumbing repairs.
  • Active appliances: Hard water is also hard on appliances. Washing machines and dishwashers are frequently exposed to large amounts of water. If this water contains elements that are harder to process, wash away or drain, your appliances are more likely to clog, corrode or fail. A water softener system can help preserve your appliances and keep them active over the long haul.
  • Softer skin: If you’ve ever bathed in both hard water and soft water, you probably noticed a difference afterwards. Hard water can leave traces of calcium or other elements in your hair and on your skin. As a result, your hair may be duller, drier or more brittle. Your skin can also feel dry, itchy or irritated due to mineral deposits. A water softener system in Missoula, MT will remove these elements and help keep your hair and skin smooth and soft.
  • Whiter whites: Did you know soft water can enhance your wardrobe? Hard water can stiffen fabrics and dull colors. Washing your clothes in soft water will help preserve them for years to come. You can spend less on clothing, since items last longer and can then be used as hand-me-downs, too.
  • Quicker cleaning: Over time, hard water leaves mineral deposits on faucets, drains and other surfaces. Cleaning these can become quite a chore. Reduce heavy-duty scrubbing with the use of a water softener system. Your cleaning will be quicker and you won’t have to use such harsh chemicals to achieve a smooth, shiny surface. Instead, you can spend your time and money on things that are far more fun than scrubbing bathrooms!

Are you considering adding a water softener system in Missoula, MT? If you have any questions or would like additional information, contact the team at Camp Well Drilling & Pump Service. As your local water experts, we can provide the answers you need. Our in-depth knowledge and superior service is unparalleled in our field.

Reach one of our highly trained technicians today at 406-549-3411. We look forward to partnering with you to provide the best water solutions for you and your family.

Are you familiar with submersible water pumps in Missoula, MT? This machinery offers a great option for many property owners. To determine if this type of pump is best for you, use the following guide. If you have any additional questions about submersible water pumps, don’t hesitate to contact your local water source expert.

What is a submersible water pump in Missoula, MT?

This style of well pump operates underground. Installed beneath the surface and completely submerged in liquid, a submersible water pump is designed to push the water underground to the surface. This mechanism is the reverse of other types of pumps, which suck water from the ground.

How does a submersible water pump in Missoula, MT work?

Submersible pumps are typically made of a two-to-four-foot cylinder that is about four inches in diameter. The cylinder is hermetically sealed to prevent short circuits. The pump’s motor drives an impeller that spins and draws water into the pump. It then pushes the water through the cylinder and up to the surface. A cable is connected to the motor for power, and a connected pipe carries the water to the surface for deposit into a storage tank.

What are the advantages of a submersible water pump in Missoula, MT?

This style of water pump offers several benefits to property owners. First, they offer longevity—the typical lifespan of these pumps is 20 to 25 years. They are also very low maintenance. Most require initial installation, and then aren’t seen again until the end of the lifespan for replacement. Submersible pumps are also highly efficient. This translates to lower electric bills. Lastly, due to its design and its location far underground, this type of pump is quiet.

What maintenance is required for a submersible water pump in Missoula, MT?

Due to their subterranean location, many pump owners worry about the potential hassle of maintenance for a submersible water pump. However, a scheduled inspection every year or two typically helps keep your pump running for a couple of decades. Proper service by a qualified technician will keep your pump in great condition. He or she will inspect the pipe, tank, fittings, pump and pressure switch to thoroughly service your system.

What are the warning signs that it’s time to replace a submersible water pump in Missoula, MT?

Is your faucet spitting or sputtering? This is usually a sign of a failing pump. You may have a broken check valve or cracked water pipes. If your electric bill starts to rise dramatically, this is another indication that your pump is failing. A pump that continuously runs is also a red flag that it is about to fail.

Does your water look muddy or cloudy? This indicates that sediment is present in your well. You may be able to fix this problem by lowering the pump. However, a new well may also be needed. Avoid prolonged pumping of this sediment-filled water, as this can cause pump failure.

Who can I contact with additional questions?

If you have additional questions or concerns regarding submersible water pumps in Missoula, MT, contact the team at Camp Well Drilling and Pump Service. Our experienced professionals are happy to answer your questions or make arrangements for your next service.

Do you own a well? If so, is your water properly filtered? A water filtration system in Missoula, MT is an important part of your water sourcing. This system can make multiple improvements to your water and your life. If you don’t have one of these systems, consider the following reasons for adding one:

  1. Improved taste: Many water sources contain chemicals that directly affect the taste of the water. Without a water filtration system in Missoula, MT, your water may have a foul taste. This will affect your drinking water and the taste of any food to which the water is added. A filter removes the offensive particles to purify the water and improve its taste.
  2. Improved balance: While you want to remove unhealthy chemicals or contaminants from your water, there are certain minerals that are good for water to contain. Using a quality water filtration system in Missoula, MT will allow you to remove the unwanted particles and keep the healthy ones. Your water will be much more balanced and healthy.
  3. Improved quality: Your water can become contaminated for a number of reasons. Polluted groundwater, wastewater runoff and natural erosion can wreak havoc on your system. Your water can become contaminated with hazardous materials such as bacteria, lead and sediment. Laced with chemicals and other potentially dangerous natural and manmade products, your water can become unhealthy to consume. A water filtration system will rid your water of these contaminants and provide a healthy water source for you and your family.
  4. Improved health: As you and your loved ones drink filtered water that is purified and free of contaminants, you will reduce the chance of illness. Unfiltered water can cause gastrointestinal issues, nausea and other health concerns. Growing children and those with compromised immune systems can be particularly susceptible to the effects of unfiltered drinking water. When you install a water filtration system in Missoula, MT, you are adding a layer of protection to your family’s health.
  5. Improved convenience: Using bottled water or boiling your water are very inconvenient methods of avoiding unfiltered water usage. Why not simply install a water filtration system, so you can conveniently and safely use your tap water? You’ll reduce your hassle factor and save time.
  6. Improved savings: Installing a water filtration system in Missoula, MT requires some upfront cost. However, it can save you in the long run. Bottled water is expensive, and the cost never goes away. You will be buying bottles of water for the rest of your life. Once you install a filtration system, the main cost is complete. You can enjoy purified water for years to come and never buy another case of bottled water.

Improve Your Water Today

Would you like to start reaping these many benefits of filtered water? Contact the professionals at Camp Well Drilling and Pump Service to install your water filtration system in Missoula, MT. Our experienced staff can answer any questions you have and help you choose the best filtration solution for your property. We look forward to partnering with you to create clean water for you and your family!

Your water pump is an essential component that keeps your well working to keep your home or business supplied with fresh, clean water, but this part isn’t invincible. Eventually, you’ll have to replace your pump, and this can be a pretty significant expense. Because of the cost associated with water pump replacement in Missoula, MT, it’s important that you know whether replacement is really necessary. You should understand what kinds of signs to look out for that indicate the need for water pump replacement, as well as what you can do to keep your well pump in good shape for as long as possible to avoid premature replacement:

  • Changes in the quality of your water: If your water suddenly changes in its color, taste or smell, you should consider a professional inspection and pump replacement immediately. Any indication that your water quality has been compromised should be taken very seriously, and you should make sure to get things checked out. In the meantime, drink filtered or bottled water to stay on the safe side and avoid any waterborne illnesses.
  • Noisy operation: Loud noises coming from your plumbing system can indicate several different problems. One of the explanations may be that your pump bearings may be worn out. As these parts become worn, they will start to make squeaking or clicking sounds and may need to be replaced. Another possible explanation for noisy well operation is that some debris has gotten into your pump housing and is impeding its usual function. If the debris does enough damage, you may need a complete water pump replacement in Missoula, MT.
  • Water sputtering: If your water is sputtering, it might indicate that your well is struggling to bring water up. In other words, your well pump might need to be placed deeper to reach a more plentiful supply of groundwater. Only a professional will be able to make this determination, so it’s a good idea to enlist a specialist to help you determine whether the issue has to do with your plumbing or if it’s connected to a lack of water.
  • Spike in costs: If you monthly energy costs seem to be sharply increasing, it’s possible that your well pump isn’t operating as efficiently as it should. Without regular service, your pump might have to work harder to move water through your system. As it ages, it might have to struggle even more just to keep up and will eventually need to be replaced.

If you think it might be time for water pump replacement in Missoula, MT, make sure to give the team at Camp Well Drilling and Pump Service a call for an in-depth inspection. We have provided premier well and pump services, including repair, maintenance and installation, since 1953, and we have developed a reputation for delivering outstanding work to our commercial and residential customers. We pride ourselves on the quality of our services and our dedication to customer satisfaction. We can walk you through any issues with your water pump and offer comprehensive solutions to increase your system’s effectiveness and longevity. To schedule your appointment, give us a call today.

Saturday, 24 November 2018 14:24

Can Your Water Well Go Dry?

If your home, business or municipal property uses a well to get water from underground, you may think that the water is always available. While the process of drilling and installing a new well is strategic so you will have water ready whenever you need it, there is always the possibility that your well can run dry.

Fortunately, dry wells are not necessarily permanent. Before panicking about a well running dry, call your local well drilling company in Missoula, MT and see what they can do to help prevent your well from drying up and leaving your building without water.

To better understand dry wells, you must first understand where well water comes from and how it is replenished.

Understanding how wells work

As part of the hydrologic cycle, precipitation from the sky will go to three places: it will evaporate and turn into precipitation again; it will runoff into streams, rivers, lakes and oceans; and it will infiltrate into the ground between soil and rock. This is what we call groundwater.

Groundwater is constantly moving and will seep through various layers of rock and soil. Almost all of the space between rocks gets filled with water, and when a well drilling company in Missoula, MT creates a well to tap into this water, the space underground is called an aquifer.

As your well pump pulls water from the ground, the aquifer below is constantly refilling with fresh water due to the hydrologic cycle and consistent precipitation. This allows your well to provide a steady stream of water. Unfortunately, wells can go dry over time.

Why wells go dry

Your well will be considered dry when the water level in your well drops below pump intake, meaning the water level is too low for your well pump to get water. This is more common in times of drought and overuse, since water is being used faster than it can be replenished by precipitation.

Dry wells may also occur due to the natural flow of water underground. Water fills cracks and holes in the soil and dirt below the earth, but the infiltration may change over time, leaving your aquifer drier than it has been in the past.

Fortunately, this does not mean your well will be dry forever. The hydrologic cycle is constant, even in times of drought. Over time, the water level may rise again, rendering your well usable once more.

What to do when your well is drying up

If you start to notice your well water become murky or your faucets start to sputter with air when running the tap, you should call a well drilling company in Missoula, MT and have them check for a dry well.

Sometimes, the professionals can fix the problem by lowering your water pump to the level at which water currently exists underground. You may also need to deepen your well or hydrofrac it to open up the space underground and increase water flow to your aquifer.

If you suspect your well is going dry, call Camp Well Drilling and Pump Service! Our well drilling company in Missoula, MT has over 65 years of experience installing, repairing and replacing water pumps, drilling wells and installing pressure systems and other hardware. Call us today to learn more about how we can serve you!