Are you familiar with submersible water pumps in Missoula, MT? This machinery offers a great option for many property owners. To determine if this type of pump is best for you, use the following guide. If you have any additional questions about submersible water pumps, don’t hesitate to contact your local water source expert.
What is a submersible water pump in Missoula, MT?
This style of well pump operates underground. Installed beneath the surface and completely submerged in liquid, a submersible water pump is designed to push the water underground to the surface. This mechanism is the reverse of other types of pumps, which suck water from the ground.
How does a submersible water pump in Missoula, MT work?
Submersible pumps are typically made of a two-to-four-foot cylinder that is about four inches in diameter. The cylinder is hermetically sealed to prevent short circuits. The pump’s motor drives an impeller that spins and draws water into the pump. It then pushes the water through the cylinder and up to the surface. A cable is connected to the motor for power, and a connected pipe carries the water to the surface for deposit into a storage tank.
What are the advantages of a submersible water pump in Missoula, MT?
This style of water pump offers several benefits to property owners. First, they offer longevity—the typical lifespan of these pumps is 20 to 25 years. They are also very low maintenance. Most require initial installation, and then aren’t seen again until the end of the lifespan for replacement. Submersible pumps are also highly efficient. This translates to lower electric bills. Lastly, due to its design and its location far underground, this type of pump is quiet.
What maintenance is required for a submersible water pump in Missoula, MT?
Due to their subterranean location, many pump owners worry about the potential hassle of maintenance for a submersible water pump. However, a scheduled inspection every year or two typically helps keep your pump running for a couple of decades. Proper service by a qualified technician will keep your pump in great condition. He or she will inspect the pipe, tank, fittings, pump and pressure switch to thoroughly service your system.
What are the warning signs that it’s time to replace a submersible water pump in Missoula, MT?
Is your faucet spitting or sputtering? This is usually a sign of a failing pump. You may have a broken check valve or cracked water pipes. If your electric bill starts to rise dramatically, this is another indication that your pump is failing. A pump that continuously runs is also a red flag that it is about to fail.
Does your water look muddy or cloudy? This indicates that sediment is present in your well. You may be able to fix this problem by lowering the pump. However, a new well may also be needed. Avoid prolonged pumping of this sediment-filled water, as this can cause pump failure.
Who can I contact with additional questions?
If you have additional questions or concerns regarding submersible water pumps in Missoula, MT, contact the team at Camp Well Drilling and Pump Service. Our experienced professionals are happy to answer your questions or make arrangements for your next service.